• Up to 500 scans/sec
• 1D CCD sensor, rapidly decodes 1D barcodes (M300)
• 2D CMOS sensor, rapidly decodes 1D & 2D barcodes (M300C)
• Optical camera filter ideal for indoor & outdoor use
• USB rechargeable, high capacity Lithium battery
• Bluetooth 4.2 for real-time data transfer
• HID, GATT protocol supported
• SPP protocol supported (only available for M300S)
• Audible & visible feedback after a successful scan
• Free Android & iOS SDK allow customized scanning behavior
,
Model | M300 | M300C | |
Barcode type support | 1D | 1D/2D | |
Real-time data upload functioin | Support | ||
Maximum data staging storage | 256 | ||
Bluetooth chip | Model | TLSR826X | |
Protocl versioin number | 4.2 BLE | ||
Configuration protocol | HID, GATT | ||
Scanning module | Illumination | White LED | |
Aiming | Red LED | ||
Service frequency | 8 MHz | ||
Scanning frequency | 500 scans/second | ||
Ambient light | 0~10000 Lux | ||
Sensor | 1D Linear, CCD sensor | 2D 640*480,CMOS | |
Data reading distance | PCS 90%: 50cm (barcode density 220 miles/0.5mm), PCS 90% | 20~310mm | |
Contrast ratio | PCS 45% (barcode density 4 miles/0.1mm) | ≥ 25% | |
Resolution ratio | PCS 90% (barcode density 4 miles/0.1mm) | PCS 90%, CODE 39: ≥ 4mil/0.1mm | |
Scanning angle | 5°~60° | Roll 0-360°; Pitch ±60°; Skew ±60° | |
Symbologies | 1D | UPC/EAN/JAN, EAN128,Code39, Code32, Code128, CODABAR/NW7. Interleave 25, Industrial 25, Matrix25, MSI/PLESSEY, Telepen, Code26, LCD25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded | |
2D | - | QR Code, DataMatrix, PDF417, etc. | |
Firmware upgrade mode | OTA | ||
Filter | Allocate | ||
Software develoment kit | Android, iOS | ||
Battery performance | Charging time | 3 Hours | |
Scanning times | 20,000 times | ||
Standby time | 30 days | ||
Physical Parameter | Size | 80 X 30 X 20 mm | |
Environment Parameter | Operation | 0 ℃~50℃(32°F~122°F), Relative humidity | |
Storage | -20 ℃~70℃(-4°F~158°F), Relative humidity |