Home  >  PRODUCT  >  TTO PRINTERS  >  FC53 Thermal Transfer Overprinting
FC53
OVERVIEW TECH SPECS DOWNLOADS
HPRT Thermal Transfer Overprinting
HPRT thermal transfer overprinter
HPRT Industrial flexible packaging printer
HPRT TTO for soft packaging printing

Thermal Transfer Overprinting

•  Cost saving
•  Optimized operation
•  Highly reliable

•  Environment friendly
•  Effective printing
•  Optimized ribbon usage

HPRT Thermal Transfer Overprinting
HPRT thermal transfer overprinter
HPRT Industrial flexible packaging printer
HPRT TTO for soft packaging printing

Flexible packaging printingThermal Transfer Overprinting solution

TTO

TTO thermal transfer overprinter applications

ItemsFC53-LiFC53-RiFC53-LcFC53-Rc
Structure

All-metal structure

Printing Method

Thermal transfer printing

Resolution

300 dpi (12 dots/mm)

Printing Speed

40-600mm/s

Printing Width

53 mm (300dpi)

Print Area53*75mm53*75mm53*100mm53*100mm
Processor

32-bit RSIC processor

Flash Memory

8MB (minimum)

Dynamic Memory

16MB (minimum)

Real-time Clock Function 

STD, battery discharge life is at least 3 years

Sensor

Ribbon tension detection; thermal head position detection; cover open detection;

TPH over temperature detection; ribbon break detection

Flexible Packaging Inspection

Electromagnetic induction or synchronizer

Flexible Packaging Materials

PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, CPP, PE,

VMPET, VMCPP and other films and composite films

Ribbon Capacity1 ”mandrel with a maximum length of 1100 meters
Ribbon TypeType: Wax / Resin;Resin width: 20 mm (0.79 ") to 55 mm (2.17")
Ribbon Saving

Support interlaced, radial, multiple print signals, digital ribbon saving printing,

ribbon back and other ribbon saving modes;The minimum ribbon interval

between two lines of printing is not more than 0.5mm

Air SupplyMax. 6 bar/90 psi
Air ConsumptionAs low as 4 ml / print at 2.5 bar
Print Density LevelLevel 31
USB InterfaceSTD, 1 port, type B connector, USB device 2.0
USB Main InterfaceSTD, 1USB disk connection port ; USB Host 2.0, automatic detection and setting of connections
Serial PortSTD 1 port, female D-SUB 9-pin connectorDefault 9600, 8/N/1, variable baud rate and format
Ethernet InterfaceSTD 1 port, RJ-45 connector, IEEE802.3 10/100BASE-T
Hardware Interface PortInput: "Print Start" and a configurable input ; Outputs: fault, warning and 2 configurable outputs
Power SupplyInternal switching power supply module, I / P: AC90V-264V, 47/63 Hz; 150 VA
SoftwareHPRT Format Designer
Environmental Conditions

Operation: 0 to 40 ° C @ humidity 10% to 90% non-condensing

Storage: -40 to 60 ° C @ humidity 10% to 90% non-condensing

Machine Dimension

Printer: height less than 190 mm, width less than 220 mm, depth less than 236 mm

Controller: height less than 170 mm, width less than 263 mm, depth less than 190 mm

Machine WeightPrinter: less than 8 kg ;Controller: less than 5 kg
Warranty

Printer: 3 years ; Controller: 3 years ;

Thermal head: 6 months or 50 KM;Platen: 5 years

Drivers

Stay up-to-date with the latest downloads for your HPRT Printer

SEND INQUIRY NOW

  • Type of Request: *
  • Name: *
  • Telephone:
  • E-mail: *
  • Country:
  • Company Name :
  • Message: *
  •  
Contact
We use cookies on our website to give you the very best user experience. By using this site, you agree to its use of cookies.

Send An inquiry

Send An inquiry

    Please fill in your name,email and requirement

  • Please fill in the type of request.
  • Please fill in your name.
  • Please fill in your email.
  • Please fill in your inquiry content.